Building a Colloidal Silver Generator Tutorial
Basic Colloidal Silver Production - Learn How to Make Colloidal Silver

Looking to make my own generator or purchase a good one that wiil give me small particles 20-50ppm

Greetings from Bulgaria!
Your site is very useful. I am glad that you have and help with any questions ionic / colloidal silver.

1. I use deionized water, which measure (with TDS meter) 3ppm. Whether it is clean enough? Should it be necessarily 0ppm?

2. For production of 10ppm, it takes me one hour. The device shows me 13ppm, but I draw the initial water 3ppm. Is this calculation correct?

3. My water also has a slight metallic taste. Is this normal or due to poor de-ionized water? Should I ever to feel metallic taste of water, regardless of concentration?

4. Is it possible to use electricity, less than 1ma? If you use a 0.5ma whether it will produce smaller particles and the quality or too small, not preferable? Of course this will take longer, but for me quality is important. (With silver ion treated my dad with cancer of the colon and bladder.)

5. In five minutes, I switch the polarity of the electrodes. Somewhere it was mentioned that this is done to better retention of particles and electrodes. whether it is useful and correct? On your site I could not find anything to change the polarization of the electrodes.

Greetings, Stelian!

I would like to make colloidal silver with a 12v AC adaptor. But there is a polarity switch for positive or negative. Which one do I set it on in order to make the colloidal silver?

About 18 years ago I had a virulent eye infection in both eyes. Nothing seemed to help, except applying hot compresses and staying away from any sugar. After at least a year of battling it, I decided to dose up massively on colloidal silver. I had a podunk silver maker that only produced 5 ppm, but it was all I knew to use. I drank at least three 8 oz. glasses of sillver water daily, along with micro current baths on negative polarity, and .03 frequency.

The day I started my colloidal silver regimen, I awoke to find I had a left front canine tooth broken off at the gumline. As an incredible side effect, two weeks into the colloidal silver and micro current I noticed that my tooth had grown almost completely back, and, of course, the eye infection cleared up quite a bit.

Dr. Robert Becker wrote a very interesting book called "The Body Electric" in which he states that he found silver and microcurrent to be a powerful combination to heal recalcitrant bone fractures, among a host of other things. It is also a powerful one-two punch against paralysis due to spinal fracture and strokes, to name but a few benefits.

My microcurrent machine is on the fritz, but I believe that humble, home-made colloidal silver and even a relaxation circuit, etc. could work miracles. Indeed, colloidal silver by itself can be a potent healer.

Interesting article, its amazing all the uses and benefits that colloidal silver has.

What ppm ca. can CS help me with psoriasis and high bloadpreasure
Thank you

Hi -

You cannot make a stable, effective oligodynamic isolated silver colloid or isolated solution about 20 PPM without a very high energy potential in-sol.

Therefore, in order to achieve a higher concentration of silver, you would need to add an acid to the production process, or bind the silve rto protein, or use a buffer, such as baking soda.

However, none of those ideas are good ideas, as the relative effectiveness of the silver greatly decreases, and the risk for argyria increases.

how can we make concentrations higher than 20 ppm?

how do you control the ppm?

thanks.