Knowledge is power: But only as powerful as the mind which grasps it, the heart which believes in it, and the hands which wield it.
Welcome to our new community message board (added March 7th, 2017). Play Nice! Spam will not be tolerated. Feel free to share something interesting! A link to your website may be tolerated as long as it is not spam and on "topic".
I am reading that ionic silver and colloidal silver are two different things, and that a product can't be both. It is either Ionic or colloidal. I also read that all home generators are ionic, and not colloidal, and that colloidal generators are much more complicated and expensive. If all of this is true, are we all making a less effective substance? I just bought a SilverGen SG7 Pro and it states that it is a Ionic/Colloidal Silver Generator. Am I being misled ?
For those people who make their own "home brew" colloidal silver, it is a good idea to do before and after quality checks starting with the distilled water used.
First, use a meter to test the conductivity of the distilled water. Ideally, it should read under 1.0uS.
Next, test the pH.
Testing the pH of distilled water is not as easy as it sounds. Our method:
1. Start with a properly calibrated digital pH meter, and have some pH 7.0 buffer solution on hand.
2. Add about 200 ml of the buffer solution to a clean glass. Test the pH. Make a note of the pH. While it should be 7.0, your meter may be slightly off (my last test was 7.04).
3. Next, add an equal amount of your distilled water to the pH buffer solution. Retest. If the water is perfect, the reading should be the same. Make a note of pH. Our distilled water was very slightly alkaline.
4. Last, test the pH of your end colloidal silver. The 2nd and 3rd pH readings should be exactly the same!