SilverMedicine.org
SilverMedicine.org

Colloidal Gold
Gold Colloid Generators

 

Website Search

Main Website Sections

Colloidal Silver

Colloidal Silver
Generators

SilverGen

Silver Puppy
Generators

 

 

Welcome to our colloidal gold generator / production center, which has been designed to provide information on colloidal gold and generators. Please note that we are growing this section slowly, as it is difficult to truly evaluate claims made about the various uses and effectiveness of gold colloids.

Featured: Simple Colloidal Silver Generator Tutorial
 

Colloidal Gold ( Nanoparticles ) Generator Resources

There are several different methods available for making colloidal gold. Some of the more common ones utilize laser technology. Others utilize a high voltage arcing system. The most affordable method utilizes lower voltage with a bicarbonate solution primer.

A quality true colloidal gold should be a ruby or amber color. We recommend that users AVOID ionic gold products, such as gold salts (like gold chloride). Ionic gold is very easily toxic, and may adversely effect the central nervous system if doses are not carefully monitored.

For production of true colloidal gold (and other minerals) we can currently only recommend:

Organix Colloid Generators: DIGIPRO™ Particulate (HVAC) High Voltage Laboratory Colloidal Power Systems. The NST-120 Deluxe package is an exceptional high voltage colloidal generator unit, capable of producing colloidal gold, platinum, iridium, etc. Purchase of the unit also includes a comprehensive colloid production guide.

If you use a different colloidal gold generator, please tell us about your experience!

Newest Comments
Rhonda on nebulizers.php at 10:27am (21st-Oct)
SilverSeas on Colloidal Silver Generators at 7:35am (21st-Oct)
Ode Coyote on Colloidal Silver Generators at 6:33am (21st-Oct)
Mike on Silvermedicine.org at 4:55pm (1st-Oct)
luis pecchio on Measuring the PPM of Silver at 10:01pm (14th-Sep)

Comment(s) for This Page

Comments (1)

Sort By
Topic: Colloidal Gold Generators
4/5 (3)
 
Peter Buchner (Philippines) says...

For 450ml of pure colloidal gold water at a concentration of 5-10 ppm, you need:

2 pure gold rods 2mm thick and 4 inches long

A 24 voltage power supply, 1 Amp, connected to a 320 volt booster

Do not use any chemicals or herbals.  It will take around 24 hours production time.  In the end stage the gold water will be clear and colorless.  View it wih a red laser because a TDS meter will not work.  If you would like more than 10 ppm, you must run the generator for 2 to 4 days.  The colloidal gold water will get slowly a clear reddish color, but I don't recommend any color must appear. 

You also need a hot plate with magnetic stirrer (continius running by 60c+ in the production time)

Upload
Page 1 of 1
 
 
 

Add Comment

* Required information
1000
 


This article has been viewed


times since May 2015

 

Silver
Colloidal Silver
The Colloidal Silver Generator Center


All Content Copyright 2007 AVRA unless otherwise specified

content copyright 2007 AVRA Las Vegas' AV Website Design